Cost guide
What patio covers cost
Published ranges for planning, each with its source. Not quotes and not prices we set: a matched installer quotes your patio in writing.
What these ranges mean
The ranges on this page come from published cost guides, and each range is linked to its source in the table below. They are budgeting ranges for planning, not a quote for a specific patio in Buckeye or a nearby West Valley town. A matched local installer gives a written quote for the specific size, material, color, footing plan, and electrical work, and that quote is the figure a homeowner should rely on for a decision.
Ranges differ between guides because guides cover different markets, different years, and different definitions of installed cost. A guide that includes footings, engineering, and permits will give a higher total than a guide that lists material and labor alone. A guide for a coastal market will give higher labor figures than a guide for a desert market. A homeowner should read the source note next to each range, and should compare total quotes for the same size and material, rather than comparing a per square foot figure from one guide with a total figure from another guide.
Size changes the total more than a per square foot rate suggests, because posts, beams, footings, and gutters do not scale in a straight line. A small cover may cost more per square foot than a large cover, because the fixed work is spread over fewer square feet. A large cover may cost less per square foot but more in total, because it needs more material and more footing work. A 12 by 20 foot cover is 240 square feet, and that size is used in several guides below as a common example for a main patio.
Extras that often sit outside a base cover price include a new concrete slab, electrical work for lights or a fan, engineering when a span requires it, permit fees, and community approval time. A freestanding cover usually costs more than an attached cover of the same size, because it needs extra posts and footings. Those items should be listed in a written quote, so a homeowner can see what is included and what is not, and can ask about any item that is missing.
Published ranges, with sources
| Range as published | Source |
|---|---|
| Aluminum patio covers, $25 to $45 per square foot installed, $3,000 to $7,000 installed in total for a typical cover | Globus Gates, Patio Cover Installation Cost (2025 Guide) |
| Alumawood lattice, $25 to $45 per square foot installed, $6,000 to $10,800 for a 12 by 20 foot cover | Green Design and Build, Patio Cover Contractors in Los Angeles |
| Alumawood solid, $30 to $55 per square foot installed, $7,200 to $13,200 for a 12 by 20 foot cover | Green Design and Build, Patio Cover Contractors in Los Angeles |
| Alumawood covers overall, $18 to $55 per square foot installed, by lattice, solid, and insulated type | HomeGuide, How Much Does a Covered Patio Cost? (2026) |
| Alumawood lattice $18 to $22, solid $20 to $35, insulated $36 to $55 per square foot installed | Royal Covers, Alumawood Patio Covers Pros and Cons |
| Insulated aluminum panels, $45 to $75 per square foot installed, $10,800 to $18,000 for a 12 by 20 foot cover | Green Design and Build, Patio Cover Contractors in Los Angeles |
| Solid roof systems with insulated aluminum panels in a desert market, $40 to $55 per square foot installed, standard cover $5,000 to $10,000 in total | EngineerFix, How Much Do Patio Covers Cost in Las Vegas? |
| Standard 200 square foot solid Alumawood cover, $5,000 to $8,000 fully installed, in that desert market guide | EngineerFix, How Much Do Patio Covers Cost in Las Vegas? |
| Freestanding instead of attached, extra $1,500 to $4,000 for extra posts and footings | Green Design and Build, Patio Cover Contractors in Los Angeles |
| Permit and plan check fees, $400 to $1,500, and electrical for fans, lights or heaters, $1,000 to $3,500 | Green Design and Build, Patio Cover Contractors in Los Angeles |
| Basic wood pergola $2,500 to $5,000, vinyl pergola $3,000 to $6,000, aluminum pergola $2,000 to $5,500, custom pergola $6,000 to $10,000 or more | Opple House, How Much Does a Pergola Installation Cost? |
| Aluminum covers generally, $20 to $50 per square foot installed, and insulated aluminum panels, $30 to $60 per square foot installed | EngineerFix, How Much Do Patio Covers Cost? |
How to use this guide
Start with the cover type that fits the patio use, then use the range for that type as a planning figure. A dining patio that needs rain protection points toward a solid or insulated cover, while a garden seating area points toward a lattice cover or a pergola. A homeowner who wants low upkeep points toward aluminum or an Alumawood style finish, while a homeowner who prefers wood should add a sealing schedule to the long term cost.
Send the quote request with the approximate patio size, the sun direction, and the cover type, so the matched installer can bring useful options to the visit. At the visit, ask for a written quote that lists the material, the size, the color, the post and footing plan, the gutter plan, and any electrical work. That written quote, not a guide range, is the basis for comparing installers and for deciding whether to proceed.
Free match
Turn a range into a written quote
Send a few details about the patio. A licensed local installer will call you to set up a visit and send a written quote.
- (000) 000-0000
- Free match, no obligation
- Matching in Buckeye and the West Valley
